Amacan P
Amacan P
Wet-installed submersible motor pump for installation in discharge tubes, with axial propeller in ECB design, single-stage, single-entry. ATEX-compliant version available.
Wet-installed submersible motor pump for installation in discharge tubes, with axial propeller in ECB design, single-stage, single-entry. ATEX-compliant version available.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Irrigation pumping stations
- Drainage pumping stations
- Stormwater pumping stations
- Raw water pumps and clean water pumps in waterworks and waste water treatment plants
- Cooling water pumps in power stations and industry
- Industrial water supply
- Water pollution control
- Flood control
- Aquaculture
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- The pump’s own weight ensures self-centring seating in the discharge tube, and an O-ring seals it; quick to install or remove.
- The slim motor keeps discharge tube flow losses down.
- High reliability thanks to bearing temperature monitoring, vibration sensor, thermal motor protection, leakage sensors in the motor space and connection space as well as leakage monitoring of the mechanical seal system.
- Low-vibration hydraulic system; inlet ribs and optimised bellmouth for vortex-free inflow.
- Absolutely water-tight resin-sealed cable entries prevent any water from entering the motor – even in the event of a damaged cable.
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Drive concept | With electric actuator |
| 2. | Max. flow rate | 25200 m3/h |
| 3. | Min. flow rate | 0.1 m3/h |
| 4. | Max. head | 12 m |
| 5. | Min. head | 0.1 m |
| 6. | Mains frequency | 50 Hz, 60 Hz |
| 7. | Mains voltage | 380 V, 400 V, 460 V |
| 8. | Nominal pressure | PN 16 |
| 9. | Suction behaviour | Non-self-priming |
| 10. | Maximum allowable fluid temperature | 40 °C |
| 11. | Minimum allowable fluid temperature | 2 °C |