Amarex KRT
Amarex KRT
Horizontal or vertical single-stage submersible motor pump in close-coupled design, with various next-generation impeller types, for wet or dry installation, stationary or transportable version, with energy-saving motor and models for use in potentially explosive atmospheres.
Horizontal or vertical single-stage submersible motor pump in close-coupled design, with various next-generation impeller types, for wet or dry installation, stationary or transportable version, with energy-saving motor and models for use in potentially explosive atmospheres.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Waste water management
- Service water supply systems
- Disposal
- Waste water treatment plants
- Sludge disposal
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Absolutely water-tight resin-sealed cable entries prevent any water from entering the motor – even in the event of a damaged cable.
- Reliable operation ensured by leakage sensors signalling any ingress of moisture into the motor
- Reliable operation ensured by sensors monitoring the motor temperature and preventing overheating
- Non-clogging low-maintenance design with large free passages reduces clogging risk and, consequently, maintenance work.
- High-efficiency motors and variable hydraulic systems for optimum hydraulic efficiency and energy efficiency
- Material variants C1 and C2:
- Long service life due to corrosion-resistant wetted parts made of stainless steel
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator |
| 4. | Max. flow rate | 10080 m3/h |
| 5. | Min. flow rate | 0.1 m3/h |
| 6. | Max. head | 120 m |
| 7. | Min. head | 0.1 m |
| 8. | Mains frequency | 50 Hz, 60 Hz |
| 9. | Mains voltage | 200 V, 208 V, 220 V, 230 V, 240 V, 380 V, 400 V, 415 V, 440 V, 460 V, 480 V, 500 V, 525 V, 575 V, 600 V, 660 V,690 V |
| 10. | Casing material | EN-GJL-250, EN-GJS-500-7, EN-GJN-HB555(XCR14), 1.4517 |
| 11. | Nominal pressure | |
| 12. | PN 10, | |
| 13. | PN 16, | |
| 14. | CL 125, | |
| 15. | CL 150 | |
| 16. | Max. allowed working pressure | |
| 17. | 12 bar | |
| 18. | Suction behaviour | |
| 19. | Non-self-priming | |
| 20. | Maximum allowable fluid temperature | |
| 21. | 60 °C | |
| 22. | Minimum allowable fluid temperature | |
| 23. | 0 °C |