Magnochem
Magnochem
Horizontal seal-less volute casing pump in back pull-out design, with magnetic drive, to DIN EN ISO 2858 / ISO 5199, with radial impeller, single-entry, single-stage. ATEX-compliant version available.
Horizontal seal-less volute casing pump in back pull-out design, with magnetic drive, to DIN EN ISO 2858 / ISO 5199, with radial impeller, single-entry, single-stage. ATEX-compliant version available.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Chemical industry
- District heating
- Industrial recirculation systems
- Air-conditioning systems
- Condensate transport
- Cooling circuits
- Petrochemical industry
- Pipelines and tank farms
- Refinery
- Process engineering
- Hot-water heating systems
- Sugar industry
- Heat transfer fluids / thermal oil systems
- Industry
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- High operating reliability:
- Only static sealing elements are required
- Only static sealing elements are required
- Optional leakage barrier
- Containment shroud protected by anti-rub feature on outer rotor and inner rotor
- Self-draining facility of containment shroud
- Broad application range:
- Product-lubricated plain bearings made of silicon carbide (DLC coating optionally available)
- Modular design principle for hydraulic system and magnetic coupling
- Large number of operating modes
- Low-maintenance design:
- Product-lubricated plain bearings made of silicon carbide (wear-free)
- Ideally suited for high fluid temperatures:
- Lower surface temperatures thanks to heat barrier.
- Temperature of rolling element bearings is reduced by cooling fins.
- Can be used with special measures in atmospheres of ATEX temperature classes whose defined temperature is lower than that of the fluid.
- High safety with optional secondary and tertiary sealing elements arranged in series
- Controlled leakage drain by means of optional connection between barriers
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator |
| 4. | Max. flow rate | 1400 m3/h |
| 5. | Min. flow rate | 1 m3/h |
| 6. | Max. head | 236 m |
| 7. | Min. head | 3.5 m |
| 8. | Mains frequency | 50 Hz, 60 Hz |
| 9. | Mains voltage | 400 V, 460 V |
| 10. | Casing material | GP240GH+N/A216 GR WCB, 1.7706, 1.4408/A743CF8M, 1.4408, 1.4593/1.4517/A995 GR 1B |
| 11. | Nominal pressure | PN 40 |
| 12. | Max. allowed working pressure | 40 bar |
| 13. | Suction behaviour | Non-self-priming |
| 14. | Maximum allowable fluid temperature | 350 °C |
| 15. | Minimum allowable fluid temperature | -90 °C |