Etanorm
Etanorm
Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Handling clean or aggressive fluids not chemically and mechanically aggressive to the pump materials.
- Water supply systems
- Cooling circuits
- Swimming pools
- Fire-fighting systems
- General irrigation systems
- Drainage systems
- Heating systems
- Air-conditioning systems
- Spray irrigation systems
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Improved efficiency and NPSHreq by experimentally verified hydraulic design of impellers (vanes)
- Operating costs reduced by trimming the nominal impeller diameter to match the specified duty point
- Little wear, low vibration levels and excellent smooth running characteristics thanks to good suction performance and virtually cavitation-free operation across a wide operating range
- Large variety of materials as standard for perfectly matching the pump to the fluid handled
- PumpDrive perfectly matched to pump and motor by default factory parameter settings
- Motor-mounted variable speed system up to 45 kW saves space
- Pump operation made fully transparent with PumpMeter
- The efficiency of the motor also exceeds 95 % of the nominal efficiency when the motor runs at 25 % of its nominal power on a quadratic torque-speed curve.
- Sustainable and environmentally friendly because no magnets based on “rare earth elements” such as NdFeB are used
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator, Combustion engine |
| 4. | Max. flow rate | 1368 m3/h |
| 5. | Min. flow rate | 1.5 m3/h |
| 6. | Max. head | 160 m |
| 7. | Min. head | 2 m |
| 8. | Mains frequency | 50 Hz, 60 Hz |
| 9. | Mains voltage | 400 V, 460 V, 220 V, 230 V, 240 V, 380 V, 415 V, 500 V, 575 V, 660 V, 690 V |
| 10. | Casing material | EN-GJL-250/A48 CL 35B, CC480K-GS/B30 C90700, 1.4408/A743CF8M, EN-GJS-400-15/A536 GR 60-40-18 |
| 11. | Nominal pressure | PN 16, PN 10, CL 150, CL 125 |
| 12. | Max. allowed working pressure | 16 bar |
| 13. | Suction behaviour | Non-self-priming |
| 14. | Maximum allowable fluid temperature | 140 °C |
| 15. | Minimum allowable fluid temperature | -30 °C |