WKL
WKL
Horizontal, radially split, multistage ring-section pump with radial impellers. Sealing between the stages is provided by gaskets. The stages are clamped together by tie bolts. Pump supports are integrally cast at the bottom of the suction casing and discharge casing.
Horizontal, radially split, multistage ring-section pump with radial impellers. Sealing between the stages is provided by gaskets. The stages are clamped together by tie bolts. Pump supports are integrally cast at the bottom of the suction casing and discharge casing.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Waterworks
- General irrigation systems
- Sprinkler systems
- Condensate transport
- Fire-fighting systems
- High-pressure water in hydraulic presses
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Generates high pressures
- Service-friendly and easy to maintain
- Pump easy to install
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator |
| 4. | Max. flow rate | 26.3 m3/h |
| 5. | Min. flow rate | 0.1 m3/h |
| 6. | Max. head | 380 m |
| 7. | Min. head | 1 m |
| 8. | Mains frequency | 50 Hz |
| 9. | Mains voltage | 415 V |
| 10. | Casing material | IS 210 GR FG260 |
| 11. | Nominal pressure | PN 25 |
| 12. | Max. allowed working pressure | 25 bar |
| 13. | Suction behaviour | Non-self-priming |
| 14. | Maximum allowable fluid temperature | 140 °C |