WK
WK
WK/WL are multistage, horizontal pumps (WL not available as single-stage variant) with radially split suction, discharge and stage casings. Stage casings are clamped together by tie bolts. Stage casings and tie bolts are covered.
WK/WL are multistage, horizontal pumps (WL not available as single-stage variant) with radially split suction, discharge and stage casings. Stage casings are clamped together by tie bolts. Stage casings and tie bolts are covered.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Waterworks
- Service water supply systems
- Boiler feed applications
- Condensate transport
- Cold water systems
- Hot-water supply
- Fire-fighting systems
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Integrated cooling jacket with closed cooling circuit for a long motor life
- Suitable for waste water containing coarse solids and long fibres
- Pump easy to install
- Robust design
- Heavy duty bearing housing
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator |
| 4. | Max. flow rate | 390 m3/h |
| 5. | Min. flow rate | 3 m3/h |
| 6. | Max. head | 540 m |
| 7. | Min. head | 1 m |
| 8. | Mains frequency | 50 Hz |
| 9. | Mains voltage | 415 V |
| 10. | Casing material | IS 210 GR FG260, A216 GR WCB, A995 GR 1B, A743 GR CF8, A743 GR CA6NM, A743 GR CF8M |
| 11. | Nominal pressure | PN 63 |
| 12. | Max. allowed working pressure | 63 bar |
| 13. | Suction behaviour | Non-self-priming |
| 14. | Maximum allowable fluid temperature | 230 °C |
| 15. | Minimum allowable fluid temperature | -10 °C |