UPF
UPF
Multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Radial hydraulic systems available for various ranges. For applications with high heads. For well diameters of 6 inches (150 mm) and above. Available with three-phase motor with motor lead.
Multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Radial hydraulic systems available for various ranges. For applications with high heads. For well diameters of 6 inches (150 mm) and above. Available with three-phase motor with motor lead.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Domestic water supply
- General irrigation systems
- Spray irrigation systems
- Groundwater management
- Pressure booster system
- Fountains
- Solar-powered pump system
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Various hydraulic systems for different head and flow rate requirements.
- Energy-saving pump set qualified for rating to the Indian BEE energy-efficiency label (3 to 5 stars)
- Pump easy to install
- Robust design
- Service-friendly rewindable motor
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Connection type | Flange |
| 2. | Drive concept | Without |
| 3. | Max. flow rate | 40 m3/h |
| 4. | Min. flow rate | 2 m3/h |
| 5. | Max. head | 485 m |
| 6. | Min. head | 9 m |
| 7. | Mains frequency | 50 Hz |
| 8. | Casing material | ST, JL/LAMELLAR GRAPHITE CAST IRON |
| 9. | Suction behaviour | Non-self-priming |
| 10. | Maximum allowable fluid temperature | 33 °C |
| 11. | Minimum allowable fluid temperature | 25 °C |