PERISTAR SZ
PERISTAR SZ
Peristar SZX is a type series of close-coupled pumps with excellent suction ability, suitable for a suction lift of up to 8 metres. The casing, adapter and end shields are made of durable cast iron, ensuring high tensile strength. The pump is equipped with a high-tensile brass impeller, vacuum-impregnated stator windings and a high-quality mechanical seal for reliable, leak-free operation. The surface-cooled single-phase motor with fan cooling, 2800 rpm and dynamically balanced rotor is suitable for a wide voltage range.
Peristar SZX is a type series of close-coupled pumps with excellent suction ability, suitable for a suction lift of up to 8 metres. The casing, adapter and end shields are made of durable cast iron, ensuring high tensile strength. The pump is equipped with a high-tensile brass impeller, vacuum-impregnated stator windings and a high-quality mechanical seal for reliable, leak-free operation. The surface-cooled single-phase motor with fan cooling, 2800 rpm and dynamically balanced rotor is suitable for a wide voltage range.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Apartments and single-family houses
- Pressure boosting
- Car washes
- Water supply of commercial facilities, e.g. hotels and hospitals
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Powerful, low-noise operation, low temperature rise
- Stainless steel shaft and high-tensile brass impeller
- TEFC (totally enclosed fan cooled) motor
- Thermal overload protection protects the motor from overloading and provides it with shielding.
- Suction lift up to 8 m
- Dynamically balanced rotor for a longer bearing life and vibration-free, smooth operation.
- Robust ball bearings sealed for life
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator |
| 4. | Max. flow rate | 18000 m3/h |
| 5. | Min. flow rate | 20 m3/h |
| 6. | Max. head | 150 m |
| 7. | Min. head | 5 m |
| 8. | Mains frequency | 50 Hz, 60 Hz |
| 9. | Mains voltage | 400 V, 480 V, 575 V, 690 V, 4160 V, 6600 V |
| 10. | Casing material | GASITE 18G, GASITE WD28G, ENDURASITE 3A1X, GASITE F30G, VIBRATHANE B-602-A536 GR 80-55-06 |
| 11. | Nominal pressure | PN 25 |
| 12. | Max. allowed working pressure | 17 bar |
| 13. | Suction behaviour | Non-self-priming |
| 14. | Maximum allowable fluid temperature | 120 °C |
| 15. | Minimum allowable fluid temperature | 5 °C |