SP norm
SP norm
Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Long coupled on baseplate, suction lift up to 7 metres. Suitable pump for pumping muddy water, sewage, polluted liquids including solids etc. and applications where priming & foot valve is to be avoided.
Horizontal self priming volute casing pumps, single stage with semi open impeller, in back pull out design. Long coupled on baseplate, suction lift up to 7 metres. Suitable pump for pumping muddy water, sewage, polluted liquids including solids etc. and applications where priming & foot valve is to be avoided.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Suitable for pumping muddy water, sewage, polluted liquids including solids etc.
- For de-watering at Basements, Trenches, Swimming pools and Construction sites.
- For handling liquid cargos from ship or plane.
- Useful in tiles and marble factories for handling waste liquids.
- For Salvage operations such as saving ship or cargo, fire fighting etc.
- Any application where priming and foot valve is to be avoided.
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Sealing | Gland packing or mechanical seal |
| 2. | Driver | Motor or Engine |
| 3. | Pump body | C.I., SS |
| 4. | Impeller | C.I., SS, Bronze |
| 5. | Wear plate | C.I., SS |
| 6. | Shaft | SS 410, 316, 304 |
| 7. | Shaft sleeve | SS 410, 316, 304 |