KSTP
KSTP
The SS Motor Body Sewage Submersible Pump, designed to handle wastewater and sewage, operates on a single phase. It exhibits durability and corrosion resistance, rendering it suitable for submerged operations. These models come with ratings of 1.0 HP and 2.0 HP, designed for single-phase power supply, This pump finds application in various settings such as construction sites, hotels, restaurants, and sewage treatment plants. Additionally, it is capable of managing solid waste up to a particle size of 20 mm, attributed to its impeller made from IS 210 GR FG200 material.
The SS Motor Body Sewage Submersible Pump, designed to handle wastewater and sewage, operates on a single phase. It exhibits durability and corrosion resistance, rendering it suitable for submerged operations. These models come with ratings of 1.0 HP and 2.0 HP, designed for single-phase power supply, This pump finds application in various settings such as construction sites, hotels, restaurants, and sewage treatment plants. Additionally, it is capable of managing solid waste up to a particle size of 20 mm, attributed to its impeller made from IS 210 GR FG200 material.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Construction Sites
- Hotels and restaurants
- Sewage treatment plants
- Wastewater treatment plants
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Max. Discharge | Up to 530 LPM |
| 2. | Max. Head | Up to 16 M |
| 3. | Pipe Size | 50 mm |
| 4. | Temp. of liquid pumped | 30 C |
| 5. | Nominal Speed | 2800 RPM |
| 6. | Insulation Class | F Class |
| 7. | Solid Handling Size | 20 mm |