EWAC 400 MIG
EWAC 400 MIG
A 3 -Phase compact, though rugged machine, delivering 440 Amps maximum current, with 100% duty cycle @ 313 Amps enabling continuous fabrication, structural fabrication and Site erection works. It is most suited with 1.2MM diameter wire for structural fabrication, Shipbuilding industry and site erection in greenfield or expansion projects. The machine is enabled with the option of welding in MMAW or GMAW mode as per the site requirement and is most suited for multi-process operations. Well suited for gouging applications also.
A 3 -Phase compact, though rugged machine, delivering 440 Amps maximum current, with 100% duty cycle @ 313 Amps enabling continuous fabrication, structural fabrication and Site erection works. It is most suited with 1.2MM diameter wire for structural fabrication, Shipbuilding industry and site erection in greenfield or expansion projects. The machine is enabled with the option of welding in MMAW or GMAW mode as per the site requirement and is most suited for multi-process operations. Well suited for gouging applications also.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Efficiency at maximum Current : >/=89%
- Wire Diameter, mm : 0.8-1.2
- Mains supply, V/Ph, Hz : 415 ±15% / 3,50
- Insulation Class : H
- Rated Input Power, KVA : 19
- Enclosure Class : IP 21S
- No Load Voltage,V : 70
- Dimensions (LxWxH), mm : 687 x 320 x 581
- Output Current range MIG, A : 40- 440
- Weight in Kg : 45
- Maximum load @ 40% duty cycle MIG : 440A/36V
- Power source : 3 mtr.mains cable
- Maximum load @ 60% duty cycle MIG : 400A/34V
- Wire feeder with Interconnection cable : 2 roll and Euro connection.
- Maximum load @ 100% duty cycle MIG : 313A/29.7V
- Torch euro connector : 3mtr/5 mtr
- Power factor at Maximum Current : >/=90
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.