moviBOOST Dual
moviBOOST Dual
moviBOOST Dual is a pressure booster system with two identical, horizontal, multistage pumps run in parallel to supply the required variable volume flow rate. The system comprises two KHM/KM pumps made by KSB, including the required accessories and piping, mounted on a common baseplate, (optional) accumulator, 2 pressure switches or changeover switch, and a control panel.
moviBOOST Dual is a pressure booster system with two identical, horizontal, multistage pumps run in parallel to supply the required variable volume flow rate. The system comprises two KHM/KM pumps made by KSB, including the required accessories and piping, mounted on a common baseplate, (optional) accumulator, 2 pressure switches or changeover switch, and a control panel.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Pressure booster system
- Domestic water supply
- Chemical industry
- Pharmaceutical industry
- Washing plants
- Cleaning systems
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Suitable for drinking water pressure booster applications
- Continuous pressure monitoring via pressure gauge
- Automatic operation by pressure switches
- Easy and fast commissioning of pre-assembled and tested systems
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Drive concept | With electric actuator |
| 2. | Mains frequency | 50 Hz |
| 3. | Maximum allowable fluid temperature | 33 °C |
| 4. | Minimum allowable fluid temperature | 25 °C |