Omega
Omega
Single-stage axially split volute casing pump for horizontal or vertical installation, with double-entry radial impeller, mating flanges to DIN, EN or ASME.
Single-stage axially split volute casing pump for horizontal or vertical installation, with double-entry radial impeller, mating flanges to DIN, EN or ASME.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Waterworks
- Desalination plants
- Pressure boosting
- Water transport
- Service water and cooling water for power stations and industry
- Irrigation pumping stations
- Drainage pumping stations
- Fire-fighting systems
- Shipbuilding
- District heating systems and district cooling systems
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Low maintenance costs:
- Fast and easy to install thanks to self-centring components (upper casing part, rotor, casing cover)
- Materials resistant to corrosion and abrasion Smooth operation with low vibration levels
- Long service life
- Sealed and dry shaft
- Short bearing distances and a short shaft
- Optional impeller wear rings
- High operating reliability
- Rigid shaft without threads between the bearings
- Generously sized bearings (Lh10 = 100,000 hours)
- Reliable sealing thanks to solid casing split flange
- Double-entry impeller for axial thrust balancing
- High flexibility
- Drive can be positioned to the left or right of the pump
- Shaft sealed by gland packing or mechanical seals
- Various horizontal and vertical installation options
- Excellent efficiencies and NPSH values
- Computer-optimised impellers
- Large impeller inlet diameters for optimum suction behaviour
- Cost-effective replacing of casing and impeller wear rings
- Vortex-free intake elbow with low energy losses
- Impeller trimmed to match the specified duty point
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator |
| 4. | Max. flow rate | 4000 m3/h |
| 5. | Min. flow rate | 20 m3/h |
| 6. | Max. head | 220 m |
| 7. | Min. head | 5 m |
| 8. | Mains frequency | 50 Hz,60 Hz |
| 9. | Mains voltage | 230 V,400 V, 460 V, 500 V, 690 V |
| 10. | Casing material | EN-GJL-250, EN-GJS-400-15, 1.4517, 1.4469.09 |
| 11. | Nominal pressure | PN 10, PN 16, PN 25 |
| 12. | Max. allowed working pressure | 25 bar |
| 13. | Suction behaviour | Non-self-priming |
| 14. | Maximum allowable fluid temperature | 140 °C |
| 15. | Minimum allowable fluid temperature | 0 °C |