Gamma
Gamma
Single-stage, horizontal, with axially spilt volute casing, with integrally cast pump feet and double-entry radial impeller. Nominal diameter of the discharge nozzles from 80 mm to 350 mm
Single-stage, horizontal, with axially spilt volute casing, with integrally cast pump feet and double-entry radial impeller. Nominal diameter of the discharge nozzles from 80 mm to 350 mm
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Waterworks
- Service water supply
- Water transport
- Irrigation pumping stations
- Heating, ventilation and air-conditioning systems
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Low maintenance costs
- Fast and easy to assemble with self-aligning components
- Fast and easy to assemble with self-aligning components
- Materials resistant to corrosion and abrasion
- Smooth operation with low vibration levels
- Long service life
- Sealed shaft
- Sealed shaft
- Short bearing distances and a short shaft
- High operating reliability
- Generously dimensioned bearings
- Generously dimensioned bearings
- Reliable sealing thanks to solid casing split flange
- High flexibility
- Drive can be positioned to the left or right of the pump
- Shaft sealed by gland packing or mechanical seals
- Excellent efficiencies and NPSH values
- Large impeller inlet diameters for optimum suction behaviour
- Cost-effective replacement of casing wear rings and impeller wear rings
- Vortex-free intake elbow with low energy losses
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Connection type | Flange |
| 2. | Drive concept | Combustion engine, With electric actuator |
| 3. | Max. flow rate | 3200 m3/h |
| 4. | Min. flow rate | 3 m3/h |
| 5. | Max. head | 90 m |
| 6. | Min. head | 5 m |
| 7. | Mains frequency | 50 Hz, 60 Hz |
| 8. | Mains voltage | 415 V |
| 9. | Casing material | IS 210 GR FG260 |
| 10. | Nominal pressure | PN 10 |
| 11. | Suction behaviour | Non-self-priming |
| 12. | Maximum allowable fluid temperature | 80 °C |
| 13. | Minimum allowable fluid temperature | 0 °C |