CPK
CPK
CPK pumps are horizontal, radially split, single-stage, single-entry volute casing process pumps in back pull-out design, with radial impeller, to EN 22858 / ISO 2858 / ISO 5199. Complemented by pumps of DN 250.
CPK pumps are horizontal, radially split, single-stage, single-entry volute casing process pumps in back pull-out design, with radial impeller, to EN 22858 / ISO 2858 / ISO 5199. Complemented by pumps of DN 250.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Chemical industry
- Food industry / beverage industry
- General industry
- Refinery
- Paper industry / pulp industry
- Sugar industry
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Easy maintenance due to back pull-out design
- Esign with dry shaft, i.e. no contact between fluid handled and shaft
- Standardised pump with modular design system
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Function | Pump |
| 2. | Connection type | Flange |
| 3. | Drive concept | With electric actuator |
| 4. | Max. flow rate | 1100 m3/h |
| 5. | Min. flow rate | 250 m3/h |
| 6. | Max. head | 90 m |
| 7. | Min. head - 19 m | |
| 8. | Mains frequency | 50 Hz,60 Hz |
| 9. | Mains voltage | 415 V |
| 10. | Casing material | IS 210 GR FG260, A216 GR WCB, A995 GR 1B, A743 GR CF8, A743 GR CF8M |
| 11. | Nominal pressure | PN 25 |
| 12. | Max. allowed working pressure | 25 bar |
| 13. | Suction behaviour | Non-self-priming |
| 14. | Maximum allowable fluid temperature | 200 °C |
| 15. | Minimum allowable fluid temperature | -70 °C |