Monosub R (MR)
Monosub R (MR)
Single Stage & Three phase openwell Submersible pumps. Applications – agriculture, drinking water supply, fountains, buildings, farm houses etc. Available in both Aluminium and Copper rotor. Motor rating – upto 30HP.
Single Stage & Three phase openwell Submersible pumps. Applications – agriculture, drinking water supply, fountains, buildings, farm houses etc. Available in both Aluminium and Copper rotor. Motor rating – upto 30HP.
Key Technical Information
Max. flow rate
60 m3/h
Max. head
38 m
Maximum allowable fluid temperature
33 °C
Applications
- Irrigation for small-scale agricultural businesses
- Water supply, e.g. for gardens, greenhouses
- Water supply for domestic applications, e.g. in buildings and apartments
- Flood irrigation through Openwell & Dugwells
- Irrigation through sprinklers and drip systems
- Community water supply
- Water supply to bungalows & high rise buildings
- Household water supply
- Industrial water supply
- Cooling circuits in HVAC
- Decorative fountains
- The products are supplied in several wide voltage ranges in order to meet customer requirements.
- Available with an extended shaft for customised applications.
- Available with star rating and ISI certification.
- Motor made of cast iron and aluminium
- Sturdy design for reliable operation over an extended period of time, also under tough operating conditions
- Efficient motor design for durability: The pump set is designed for reliable performance with minimal risk of failures or malfunctions.
- Compact design, easy to install: The pump set is compact and self-contained, making it easy to install and use in a wide variety of applications.
- Wide voltage range - 250 to 440 V
- Easy to Install
- Specially Designed for underwater application and no need of priming
- Smooth Operation
- Long Life - Stainless steel shaft is used to have longer life
- Carbon Steel thrust pad used - It reduces the frictional losses and are light in weight
1.
Function
Pump
2.
Drive concept
With electric actuator
3.
Max. flow rate
60 m3/h
4.
Min. flow rate
4 m3/h
5.
Max. head
38 m
6.
Min. head
6 m
7.
Mains frequency
50 Hz
8.
Drive concept
With electric actuator
9.
Mains voltage
220 V,
240 V,
380 V,
415 V
10.
Suction behaviour
Non-self-priming
11.
Maximum allowable fluid temperature
33 °C
| 1. | Nominal Speed | 2800 RPM |
| 2. | Maximum Start Stop/Hour | 12 |
| 3. | Minimum Submerge | 1.5 m |
| 4. | Starting Method | DOL & SD |
| 5. | Power Supply | 415 V ( + 6 % - 15 % ) |